Today I printed the Minecraft Creeper and was able to film all three parts with the GoPro Hero 4 Black. Unfortunately due to the length of time for the Creeper's head and body, I elected to split the video up, into three parts, so the video did not become boring or monotonous.
Time lapse video of the Minecraft Creeper's head:
As always thank you for watching, and if you would like to suggest a Thingiverse item to be printed, be sure to hit up the comments under the YouTube video, or message me on Twitter!
Earlier this week, I found a Fallout 4 keychain, and with the game coming out in a few months, I wanted to add this to my keychain with my car keys. As mentioned in previous posts, using the MatterControl Touch, I quickly sliced and printed this object in about an hour.
Overall the print came out very well, however there was some stringing of PLA in between each letter, and along the letter "L"s. Using the Octave 3D printing tool kit, I was able to quickly remove the stringing and clean up the lettering.
Some slicing/printing information:
Print time: 1h18m
Filament: 1.75mm PLA (Natural color)
Filament Needed: 1223mm
Print Speed: 40mm/s
Outer Perimeter Speed: 28mm/s
Infill Speed: 40mm/s
Shell Thickness: 0.8mm
Temperatures: (Hotend) 180C, (Bed) 60C
Printed on: SeeMeCNC Orion Delta
If you are interested in watching the time lapse of the SeeMeCNC Orion Delta printing this Thing, check out my YouTube video here:
Thank you very much for reading this blog entry. Please continue to follow me on YouTube and subscribe for future 3D printing videos, every Saturday.
For the last week we have had very windy conditions, and with the windows open, we had a few doors slam shut and generally disturbing the peace. With that in mind, I found this Thing on Thingiverse and proceeded to print it rapidly.
Using the MatterControl Touch and printing at 30% infill, my SeeMeCNC Orion Delta proceeded to print. Overall, there were no curling or lifting of any of the "teeth" of the Thing or even the "bumps" along the top of the multi-tool.
After a few test drives and trials, the door stop multitool work like a charm. I am in the process of printing a few more for the kitchen, office and even the bedrooms. If you are looking for another Thing to print, I highly recommend printing this.
Time Lapse YouTube video of the entire print:
Some pictures of the print, post cleaning and test uses:
If you like to see more 3D printing content please like, and share these blog entries!
This week I printed a Coin Cup Holder to help organize my change after the work week.
Using the MatterControl Touch, I downloaded the STL, and using the built-in slicing software, the MatterControl Touch quickly sent the GCode to my SeeMeCNC Orion Delta and off to the races the printer went.
Unfortunately I did not realize I had set the infill to 40% at the time, however after about six hours, I checked in and saw my printer was no where near finished. Per the MatterControl Touch, the print still had another six hours to finish, and it was not far off. At roughly 11 hours and 31 minutes, this Thing is the second longest item I have ever printed.
Clean up wasn't too excessive with this Thing, thanks to the very few "points" where the hotend has to go from one far point in the X-axis, to another point in the X-axis. There was very little need for sanding or filing of the edges. When it came to actually adding the coins to to each individual chamber (there are segregated chambers for US pennies, nickels, dimes, quarters and dollar coins), I was able to add them with no issues. Each chamber can hold up to 50 coins (confirmed with pennies and nickels), so you can easily sort and count them before you roll the coins into a coin roll.
Overall I would highly recommend printing this for organizing your coins, and reduce the amount of clutter in your change jar.